Become ADA Compliant by 2026

The American Disabilities Act (ADA) 2026 exam table requirements mandate that state and local government entities must have at least one accessible examination table by August 9, 2026. The new rule requires that all newly acquired medical diagnostic equipment (MDE) from October 8, 2024, onwards, must be accessible until the facility meets the minimum requirements for accessibility. The ADA standards for these tables specify a low transfer height, a seated transfer surface, support rails, and space for transfers from multiple sides.

• Key requirements and dates
  August 9, 2026: All state and local government entities must have at least one accessible examination table and one accessible weight scale in use.
• October 8, 2024: Any MDE purchased or leased by state and local government entities must be accessible, until the required number of accessible tables and scales is met.
• July 2026: Federally funded healthcare providers must have at least one accessible exam table by this date, based on Section 504 of the Rehabilitation Act.
• Technical specifications for accessible exam tables
  Transfer height: The table must be able to adjust to a low height range of 17–19 inches to allow for safe transfers.
• Seated transfer surface: Must be at least 21 inches wide and 17 inches deep for a seated-position transfer.
• Transfer access: Patients must be able to transfer from both the side and the end of the table.
  Support and stability: Must include support rails and armrests to assist with transfers and patient positioning.
• Clearance: A minimum clear floor space of 30 x 48 inches is required next to the table, with an accessible route connecting to it, to facilitate side transfers and staff assistance.

Check out our Promotions...